Titanium Grade 5 Socket Head Cap Screws
ISO 4762ASTM B348
Titanium Grade 5 socket head cap screws suit lightweight tooling, robotic assemblies and compact corrosion-exposed housings. The axial drive fits recessed head pockets, while Ti-6Al-4V reduces fastener mass where many screws travel with the moving equipment.
- MOQ
- 100PCS
- Samples · typical
- ~20 days
- Production · typical
- 25–35 days
- Heat treatment
- Annealed
EN 10204 3.1 MTC + heat-number traceability
Which standard is on your order?
Raw Material Specifications
Finished-Screw Specifications
Threads · Metric
Threads · Inch
Dimension Reference
Heat Treatment
AnnealedAnnealing reduces working stresses and restores ductility, with atmosphere and surface control limiting contamination during heating.
What we can make in Titanium Grade 5
Partial thread
Use where a plain grip must span the clamped components. Match the under-head length and thread length so the screw tightens the stack before its thread runout reaches the tapped hole.
Full thread
Use for shorter component stacks and varied tapped-hole depths. The longer usable thread offers adjustment, while the screw end must clear the bottom of a blind hole.
- Drive
- Internal hex socket
- Length basis
- Under head
- Thread systems
- Metric · UNC · UNF · UNJ
- Assembly
- Tapped holes · Nuts
- Final condition
- Annealed
- Inspection
- Thread gauges · Head and shank dimensions
Manufacturing route
CNC machining provides the initial route for special heads and small lots. Formed production requires alloy-specific temperature and surface-contamination control.
Heat treatment & final condition
Forming and thermal processing require contamination control. The final surface is cleaned before dimensional and material acceptance.
Finished geometry
Head geometry, bearing face, shank and thread fit are checked after the final machining and thermal operations.
Where Titanium Grade 5 fits — and what matters
High-speed robotic arms & linear gantries
Titanium Grade 5 Socket Head Cap ScrewsRobot tool changers and end-effectors often place screws in counterbores to keep the outside profile clear. Grade 5 socket screws reduce the moving hardware mass and can be tightened along the screw axis. The counterbore depth must still leave a supported head seat and enough key engagement for repeated tool changes.
Connection requirements
- Counterbore and head clearance
- Tool-plate thread material
- Preload and anti-galling assembly method
Wafer-handling robotics & cleanroom gantries
Titanium Grade 5 Socket Head Cap ScrewsTitanium Grade 5 socket screws fasten wafer-handler arms and gripper brackets where low moving mass and close component spacing matter. Recessed heads fit the compact mechanism, with axial access around neighbouring parts. The mounting location determines the surface-cleaning and particle-control finish needed before assembly.
Connection requirements
- Cleaning and particle specification
- Axial tool access
- Bracket thread engagement
Precision rotary tables & spindle mounts
Titanium Grade 5 Socket Head Cap ScrewsOn rotary tables, recessed socket screws keep tooling fasteners below the working surface. Grade 5 lowers the mass of the rotating fastener group. Screw length, mass consistency and tightening sequence matter where the tooling plate must remain balanced and flat after assembly.
Connection requirements
- Counterbore depth and screw length
- Mass consistency across the pattern
- Tooling-plate flatness and preload
Same socket head cap screw. Different material priorities.
Titanium Grade 5 material dataInconel 625 Socket Head Cap Screws
Inconel 625 socket head cap screws fit compact seawater housings and wet-process covers where liquid can remain beneath the head or inside the drive. Chloride pitting and crevice-corrosion resistance supports these exposed fastening points. Axial access suits recessed mounts between adjacent fittings.
Inconel 718 Socket Head Cap Screws
Inconel 718 socket head cap screws put precipitation-hardened strength into highly loaded, counterbored connections on heated test fixtures and compact machinery mounts. The internal drive reaches the screw between adjacent components. They are especially relevant when the hole pattern limits screw diameter and the drawing calls for high strength at the actual operating temperature.
Super Duplex 2507 Socket Head Cap Screws
2507 socket screws are useful for compact saline-service housings that need higher strength and chloride resistance than common stainless fasteners. The cylindrical head fits a counterbore, and tightening is along the screw axis. The housing thread and head seat must be sized to carry the load available from the stronger screw.
From drawing to documented delivery
- 01Drawing & BOMForm, dimensions and quantity
- 02Material & formingGrade, heat and manufacturing route
- 03Final inspectionGeometry, threads and ordered tests
- 04Documents & dispatchLot records and identified packing
Order documents
- Material identity
- UNS R56400 · heat number · ordered condition
- Final-part acceptance
- Grade chemistry, surface condition and the ordered mechanical requirements.
- Dimensional record
- Thread gauges · Head and shank dimensions
- Traceability
- EN 10204 3.1 material certificate · production lot · identified packing
Build your Titanium Grade 5 socket head cap screw enquiry
Questions about Titanium Grade 5 socket head cap screws
What changes when the screw is stronger than the housing?
The housing thread can strip before the screw reaches its tensile capacity. The engagement depth and housing material therefore belong in the joint assessment alongside the screw’s final strength condition.