Typical MOQ
10pieces
Subject to product and material review.
Conditions
MOQ is typically 10 pieces, subject to product, material and manufacturing-route review.
Special Alloy Strip
MaterialChoose a materialChange
Alloy strip supplied to specified thickness, width, condition and coil requirements. Include dimensional tolerances, edge requirements and the intended processing steps so that the supply condition and inspection scope can be reviewed.
Dimensions
Thickness, width and coil requirements
Provide thickness and width with tolerances. Add coil inside and outside diameter, coil weight, length, flatness, camber, edge condition and cut-length requirements where controlled.
Quality documents
Heat number traceability
Every delivery traceable by heat number
Mechanical testing
Included with every delivery
Dimensional inspection
Checked against the agreed dimensions
Product-specific review: thickness and width tolerances, edge condition, coil or cut-length form and delivery condition.
Methods, sampling and acceptance criteria follow the agreed specification. PMI, third-party inspection and additional records are agreed separately.
Before production and at delivery
During quotation, a redacted certificate from a previous order can show the document format and recorded tests. It is a historical example, not certification of this product or a new order. Shipment documents must correspond to the material and batch actually supplied.
How to read a historical certificate sample ↗Prepare your enquiry
Send a drawing and quantity.
No drawing? Use these details.
- Size
- Thickness × width Strip
- Quantity
- Weight / quantity Required quantity per size
- Material
- Grade / UNS Grade and delivery condition
- Requirements
- Drawing / standard Revision, tolerances and inspection
Start with a drawing, specification or written requirement; a drawing is not needed for an initial enquiry. For this product, include thickness and width tolerances, edge condition, coil or cut-length form and delivery condition along with the alloy grade, condition and quantity. BYBOLT clarifies open requirements with you before confirming the quotation and arranging production. Any change to an agreed material or specification requires your approval.
Commercial terms
Indicative terms; confirmed in your quotation.
Sample review
~20days
Freight, import duties and taxes are separate.
Conditions
Samples are typically reviewed on an approximately 20-day basis. BYBOLT may cover agreed sample manufacturing; buyer freight, import duties and taxes remain separate.
Production review
25–35days
Urgent requirements can be discussed.
Conditions
Regular production is commonly reviewed on a 25–35 day basis. Urgent requirements can be discussed against the complete specification.
Typical deposit
30%
T/T or LianLian. Balance before dispatch.
Conditions
Payment can be arranged by T/T or LianLian. A typical order uses a 30% deposit, with the balance completed before dispatch.
Technical help
Strip supply definition
Identify whether strip is required in coils or cut lengths and define the intended supply form. Representative images do not confirm alloy grade, dimensions, finish or stock position.
Related material guides
Request a quote
Strip
Technical guide
All GuidesContinue the Technical Review
How to Specify Alloy Round Bar, Plate, Wire and Strip
A buyer’s framework for specifying alloy mill forms by grade, product form, dimensions, condition, tolerances, surface and documents—before a supplier confirms availability.
Read Guide
MTC vs PMI vs Inspection Report: Which One Actually Proves Your Fastener Meets the Order?
An MTC, a PMI result and an inspection report answer different questions. This buyer’s evidence map shows how to connect material, finished-part inspection and traceability without treating one document as blanket proof.
Read Guide
304 vs 304L: Carbon Limits, Welding and Dual Certification
Check what the low-carbon suffix and a dual-certified offer actually establish for the product you are purchasing.
Read GuideStripRequest a quote ↗