Titanium Grade 5 Long-shank hex head bolts
ISO 4014ASTM B348
Titanium Grade 5 long-shank hex bolts carry the grip through a plain section while providing higher strength than commercially pure titanium at low density. Grip length and thread runout locate the loaded interfaces along the extended shank.
- MOQ
- 100PCS
- Samples · typical
- ~20 days
- Production · typical
- 25–35 days
- Heat treatment
- Annealed
EN 10204 3.1 MTC + heat-number traceability
Which standard is on your order?
Raw Material Specifications
Finished-Bolt Specifications
Threads · Metric
Threads · Inch
Dimension Reference
Heat Treatment
AnnealedAnnealing reduces working stresses and restores ductility, with atmosphere and surface control limiting contamination during heating.
What we can make in Titanium Grade 5
Plain grip section
Use across thick equipment flanges, spacers and mounting stacks where the grip requires a continuous plain shank. The grip length keeps the threaded transition beyond the intended bearing or shear section.
Threaded end
Allow enough usable thread beyond the stack for the nut, washer and tightening travel. Too little thread can leave the nut bottomed on the plain shank before the joint is clamped.
Long shank vs shoulder screw
For a pivot or locating bore, specify the actual shank diameter tolerance and surface finish. A long-shank bolt provides grip length; a shoulder-screw fit requires separate control of the locating surface.
- Head
- External hex
- Shank
- Extended plain length
- Length basis
- Under head
- Threads
- Metric · UNC · UNF · UNJ
- Final condition
- Annealed
- Inspection
- Thread gauges · Head and shank dimensions
Manufacturing route
CNC machining provides the initial route for special heads and small lots. Formed production requires alloy-specific temperature and surface-contamination control.
Heat treatment & final condition
Forming and thermal processing require contamination control. The final surface is cleaned before dimensional and material acceptance.
Finished geometry
Head geometry, bearing face, shank and thread fit are checked after the final machining and thermal operations.
Where Titanium Grade 5 fits — and what matters
Industrial Machinery & Automation
Machine frames and positioning fixturesTitanium Grade 5 long-shank hex head bolts pass through the deeper grip of machine frames and positioning fixtures; the extended plain shank locates the joint before the nut takes up the thread. Alignment, operating cycles and replacement access define the working interface.
Pumps, Valves & OEM
Actuator mounts and pump baseplatesTitanium Grade 5 long-shank hex head bolts pass through the deeper grip of actuator mounts and pump baseplates; the extended plain shank locates the joint before the nut takes up the thread. Repeated maintenance makes fit, engagement and access part of the component specification.
Automotive & EV Manufacturing Equipment
Assembly fixtures and test-rig framesTitanium Grade 5 long-shank hex head bolts pass through the deeper grip of assembly fixtures and test-rig frames; the extended plain shank locates the joint before the nut takes up the thread. Repeated tooling changes require consistent seating and repeatable assembly dimensions.
Same long-shank hex head bolt. Different material priorities.
Titanium Grade 5 material dataTitanium Grade 2
Low mass, corrosion resistance and commercially pure titanium formability.
- Connection priority
- Tension and thermal expansion along the extended shank
- Commercially pure titanium
- Grade 2 favours corrosion resistance and forming characteristics over the higher strength of Grade 5. Mating-metal contact, surface condition and assembly friction remain part of the connection design. Include liquid retained at the long grip inside the joint and the under-head seat in the exposure description.
Inconel 718
Precipitation-hardened strength for compact, highly loaded connections.
- Connection priority
- Tension and thermal expansion along the extended shank
- Strength after aging
- Machine-stock properties and final aged properties describe different states. The final heat-treatment lot and mechanical results establish the strength available in the installed part. At the long grip inside the joint and the under-head seat, the relevant metal temperature can differ from the process or furnace set point.
From drawing to documented delivery
- 01Drawing & BOMForm, dimensions and quantity
- 02Material & formingGrade, heat and manufacturing route
- 03Final inspectionGeometry, threads and ordered tests
- 04Documents & dispatchLot records and identified packing
Order documents
- Material identity
- UNS R56400 · heat number · ordered condition
- Final-part acceptance
- Grade chemistry, surface condition and the ordered mechanical requirements.
- Dimensional record
- Thread gauges · Head and shank dimensions
- Traceability
- EN 10204 3.1 material certificate · production lot · identified packing
Build your Titanium Grade 5 long-shank hex head bolt enquiry
Questions about Titanium Grade 5 long-shank hex head bolts
Why is total length insufficient for a long-shank bolt?
Two bolts of the same total length can put the thread runout in different places. The joint needs a defined grip length so its bearing or shear interface meets the intended shank section.