Inconel 718 Phillips pan head screws
ISO 7045ASTM B637
Inconel 718 pan-head screws bring precipitation-hardened strength for compact, highly loaded connections to panel and cover fixings. The cross recess transfers installation torque while the head footprint spreads load into the panel.
- MOQ
- 100PCS
- Samples · typical
- ~20 days
- Production · typical
- 25–35 days
- Heat treatment
- Solution treated / solution treated and aged
EN 10204 3.1 MTC + heat-number traceability
Which standard is on your order?
Raw Material Specifications
Threads · Metric
Threads · Inch
Dimension Reference
Heat Treatment
Solution treated; aged when specifiedSolution treatment prepares 718 for forming or machining, and subsequent aging develops the strength required by the ordered condition.
What we can make in Alloy 718
Pan head
Use for panels and covers that can accept a projecting head, avoiding a countersink in thin sheet. The flat underside needs sufficient seat area around the clearance hole.
Phillips drive
Use a matching Phillips type H driver for service and assembly tools. A Pozidriv type Z bit is not the same fit; mismatched recess engagement increases cam-out and head damage.
Machine screw
Use with a tapped boss, nut or threaded insert in equipment panels. Match screw length to the available engagement so a blind hole does not stop the screw before the cover is clamped.
- Drive
- Type H cross recess
- Head
- Pan head
- Length basis
- Under head
- Thread
- Machine screw thread
- Final condition
- Solution treated · solution treated and aged
- Inspection
- Head diameter · Recess · Under-head length · Threads
Manufacturing route
CNC machining suits samples and small batches. Volume heads are formed in a workable condition with the final aging route included in process planning.
Heat treatment & final condition
Solution treatment and the specified aging condition are recorded against the production lot; final dimensions are checked after thermal processing.
Finished geometry
The cross recess is checked for tool engagement and concentricity, followed by thread gauging and under-head length inspection.
Where 718 fits — and what matters
Furnaces & Heat Treatment
Furnace shields and casing panelsInconel 718 phillips pan head screws attach furnace shields and casing panels through a broad pan-head bearing face where a projecting head is acceptable and a cross-recess tool can reach the screw. Hot dwell, thermal expansion and repeated furnace cycles set the working load.
Power & Turbines
Hot-duct shields and thermal bafflesInconel 718 phillips pan head screws attach hot-duct shields and thermal baffles through a broad pan-head bearing face where a projecting head is acceptable and a cross-recess tool can reach the screw. Hot dwell and start-stop expansion act on the supported or moving component.
Chemical Processing
Process-heater shields and bafflesInconel 718 phillips pan head screws attach process-heater shields and baffles through a broad pan-head bearing face where a projecting head is acceptable and a cross-recess tool can reach the screw. These parts work in the heated equipment zone, where sustained loading and thermal expansion govern their section and clearance.
Same phillips pan head screw. Different material priorities.
Inconel 718 material dataIncoloy 800HT
Tightly controlled carbon and Al + Ti for creep duty.
- Connection priority
- Panel clamping and torque transfer through the cross recess
- N08811 material control
- 800HT tightens the 800-family chemistry around creep performance. Its solution-treated, coarse-grain condition and N08811 identity should remain linked through forming and final acceptance. At the cross recess and the underside of the pan head, the relevant metal temperature can differ from the process or furnace set point.
A-286
Aged iron–nickel alloy strength for hot bolting.
- Connection priority
- Panel clamping and torque transfer through the cross recess
- Grade 660 class
- An ASTM A453 Grade 660 order includes its class and corresponding processing requirements. The alloy name A-286 alone does not identify that acceptance condition. At the cross recess and the underside of the pan head, the relevant metal temperature can differ from the process or furnace set point.
310S
Low-carbon heat resistance in oxidation-exposed equipment.
- Connection priority
- Panel clamping and torque transfer through the cross recess
- 310S is not 310H
- S31008 is the low-carbon grade. For a component under sustained hot load, distinguish that specification from the controlled-carbon creep purpose of S31009. At the cross recess and the underside of the pan head, the relevant metal temperature can differ from the process or furnace set point.
From drawing to documented delivery
- 01Drawing & BOMForm, dimensions and quantity
- 02Material & formingGrade, heat and manufacturing route
- 03Final inspectionGeometry, threads and ordered tests
- 04Documents & dispatchLot records and identified packing
Order documents
- Material identity
- UNS N07718 · heat number · ordered condition
- Final-part acceptance
- Lot-linked aging record and mechanical acceptance in the final condition.
- Dimensional record
- Head diameter · Recess · Under-head length · Threads
- Traceability
- EN 10204 3.1 material certificate · production lot · identified packing
Build your 718 phillips pan head screw enquiry
Questions about 718 phillips pan head screws
What controls installation on a thin panel?
The panel’s bearing strength and the engaged thread can govern before the screw’s tensile strength. Match the head footprint and driver recess to the tightening method and the actual panel or insert.