Inconel 718 Eye-end / swing bolts
DIN 444ASTM B637
Inconel 718 swing bolts combine a pivoting cover clamp with precipitation-hardened strength for compact, highly loaded connections. Eye-to-pin fit and the nut-bearing arrangement define the closed connection and its maintenance travel.
- MOQ
- 100PCS
- Samples · typical
- ~20 days
- Production · typical
- 25–35 days
- Heat treatment
- Solution treated / solution treated and aged
EN 10204 3.1 MTC + heat-number traceability
Which standard is on your order?
Raw Material Specifications
Threads · Metric
Threads · Inch
Dimension Reference
Heat Treatment
Solution treated; aged when specifiedSolution treatment prepares 718 for forming or machining, and subsequent aging develops the strength required by the ordered condition.
What we can make in Alloy 718
Pivot eye
Use on hinged clamps and access covers that open frequently. The eye stays on a pivot pin so the bolt swings clear of the cover slot without removing the complete fastener.
Threaded clamp
The threaded leg sets the clamp opening and tightening travel. On a slotted cover, the nut or clamping handle needs a bearing face wide enough to bridge the slot.
Swing bolt vs lifting eye
Use a swing bolt to retain and tighten a cover; specify a rated lifting component for hoisting. The pivot eye dimensions alone do not establish an allowable lifting load.
- Interface
- Eye bore · Pivot pin
- Clamping
- Threaded shank · Nut
- Use
- Hinged covers · Fixtures
- Threads
- Metric · Inch
- Final condition
- Solution treated · solution treated and aged
- Inspection
- Eye bore · Eye thickness · Pivot-to-end length · Threads
Manufacturing route
CNC machining suits samples and small batches. Volume heads are formed in a workable condition with the final aging route included in process planning.
Heat treatment & final condition
Solution treatment and the specified aging condition are recorded against the production lot; final dimensions are checked after thermal processing.
Finished geometry
Head geometry, bearing face, shank and thread fit are checked after the final machining and thermal operations.
Where 718 fits — and what matters
Furnaces & Heat Treatment
Retort and furnace-access coversInconel 718 eye-end / swing bolts pivot into and out of the closures on retort and furnace-access covers, allowing the clamp to release without removing the bolt from its hinge pin. Hot dwell, thermal expansion and repeated furnace cycles set the working load.
Power & Turbines
Hot-gas access covers and inspection closuresInconel 718 eye-end / swing bolts pivot into and out of the closures on hot-gas access covers and inspection closures, allowing the clamp to release without removing the bolt from its hinge pin. Hot dwell and start-stop expansion act on the supported or moving component.
Chemical Processing
Reformer access covers and hot-gas inspection closuresInconel 718 eye-end / swing bolts pivot into and out of the closures on reformer access covers and hot-gas inspection closures, allowing the clamp to release without removing the bolt from its hinge pin. These parts work in the heated equipment zone, where sustained loading and thermal expansion govern their section and clearance.
Same eye-end / swing bolt. Different material priorities.
Inconel 718 material dataIncoloy 800HT
Tightly controlled carbon and Al + Ti for creep duty.
- Connection priority
- Pivot contact and tension during cover clamping
- N08811 material control
- 800HT tightens the 800-family chemistry around creep performance. Its solution-treated, coarse-grain condition and N08811 identity should remain linked through forming and final acceptance. At the eye bore around its pivot and the nut-bearing seat, the relevant metal temperature can differ from the process or furnace set point.
A-286
Aged iron–nickel alloy strength for hot bolting.
- Connection priority
- Pivot contact and tension during cover clamping
- Grade 660 class
- An ASTM A453 Grade 660 order includes its class and corresponding processing requirements. The alloy name A-286 alone does not identify that acceptance condition. At the eye bore around its pivot and the nut-bearing seat, the relevant metal temperature can differ from the process or furnace set point.
310S
Low-carbon heat resistance in oxidation-exposed equipment.
- Connection priority
- Pivot contact and tension during cover clamping
- 310S is not 310H
- S31008 is the low-carbon grade. For a component under sustained hot load, distinguish that specification from the controlled-carbon creep purpose of S31009. At the eye bore around its pivot and the nut-bearing seat, the relevant metal temperature can differ from the process or furnace set point.
From drawing to documented delivery
- 01Drawing & BOMForm, dimensions and quantity
- 02Material & formingGrade, heat and manufacturing route
- 03Final inspectionGeometry, threads and ordered tests
- 04Documents & dispatchLot records and identified packing
Order documents
- Material identity
- UNS N07718 · heat number · ordered condition
- Final-part acceptance
- Lot-linked aging record and mechanical acceptance in the final condition.
- Dimensional record
- Eye bore · Eye thickness · Pivot-to-end length · Threads
- Traceability
- EN 10204 3.1 material certificate · production lot · identified packing
Build your 718 eye-end / swing bolt enquiry
Questions about 718 eye-end / swing bolts
Is this the same as a rated lifting eye bolt?
This page covers swing-bolt cover and clamp connections. A lifting device needs a separately defined design, load rating and certification; DIN 444 geometry alone does not provide those.