410 Stud Bolts
ASME B18.31.2
410 stud bolts bring hardened-and-tempered strength with moderate corrosion resistance to flange and cover joints. The stud condition, mating nuts and end form determine how the assembly carries and retains clamp load.
- MOQ
- 100PCS
- Samples · typical
- ~20 days
- Production · typical
- 25–35 days
- Heat treatment
- Annealed / hardened and tempered
EN 10204 3.1 MTC + heat-number traceability
Which standard is on your order?
Raw Material Specifications
Finished-Stud Specifications
Threads · Metric
Threads · Inch
Dimension Reference
Heat Treatment
Hardened and temperedHardening forms the load-bearing martensitic structure, then tempering adjusts hardness and toughness to the specified final condition.
What we can make in 410
Fully threaded
Two nuts clamp the flange or cover; usable thread length spans the assembled grip.
Double-end
A plain centre spans the grip, with a threaded portion at each end for the nuts.
Tap-end
One end engages a tapped casing; the exposed end accepts the cover nut.
- Threads
- Metric · UNC · UNF · 8UN · UNJ
- Forms
- Continuous thread · Double-end · Tap-end
- Final condition
- Annealed · hardened and tempered
- Inspection
- Thread size and fit; overall and effective thread length; end geometry; lot identification.
Manufacturing route
CNC machining suits samples and special end forms. Repeat lots use cut-to-length stock with rolling or cutting selected for the ordered thread and material condition.
Heat treatment & final condition
Hardening and tempering set the final hardness and toughness. Finish dimensions are checked after heat treatment.
Finished geometry
End lengths, runout and effective thread engagement are checked separately from overall length; tap ends are gauged to their own fit requirement.
Where 410 fits — and what matters
Industrial Machinery & Automation
Machine housings and service covers410 stud bolts & threaded rods clamp machine housings and service covers with nuts on the exposed ends, keeping the stud in place when a cover is removed. Alignment, operating cycles and replacement access define the working interface.
Automotive & EV Manufacturing Equipment
Test-equipment housings410 stud bolts & threaded rods clamp test-equipment housings with nuts on the exposed ends, keeping the stud in place when a cover is removed. Repeated tooling changes require consistent seating and repeatable assembly dimensions.
Pumps, Valves & OEM
Pump casings and valve bonnets410 stud bolts & threaded rods clamp pump casings and valve bonnets with nuts on the exposed ends, keeping the stud in place when a cover is removed. Repeated maintenance makes fit, engagement and access part of the component specification.
Same stud. Different material priorities.
410 material data316L
Molybdenum-bearing stainless performance in wet equipment.
- Connection priority
- Stud tension and clamp-load retention
- Washdown and retained cleaner
- Cleaner concentration, rinse quality and deposits determine the exposure in covered joints. The low-carbon designation does not independently establish a fastener strength class. Include liquid retained at the exposed thread roots and nut-bearing faces in the exposure description.
17-4 PH
Aging-controlled strength and hardness.
- Connection priority
- Stud tension and clamp-load retention
- H900 versus H1150
- The aging condition changes the balance of strength, hardness and toughness. A replacement part needs the specified H condition, especially where contact wear and shock load occur together.
Inconel 625
Solid-solution strength and resistance to aggressive process liquids.
- Connection priority
- Stud tension and clamp-load retention
- Annealed or solution-annealed 625
- The delivery condition affects strength and high-temperature response. Keep the specified condition with the component’s mechanical acceptance; 718-style aging is not the strengthening route for 625. Include liquid retained at the exposed thread roots and nut-bearing faces in the exposure description.
From drawing to documented delivery
- 01Drawing & BOMForm, dimensions and quantity
- 02Material & formingGrade, heat and manufacturing route
- 03Final inspectionGeometry, threads and ordered tests
- 04Documents & dispatchLot records and identified packing
Order documents
- Material identity
- UNS S41000 · heat number · ordered condition
- Final-part acceptance
- Hardness and mechanical acceptance after hardening and tempering.
- Dimensional record
- Thread size and fit; overall and effective thread length; end geometry; lot identification.
- Traceability
- EN 10204 3.1 material certificate · production lot · identified packing
Matching Kit
Flange Stud Bolt Kits
Build your 410 stud enquiry
Questions about 410 stud bolts & threaded rods
Does changing the stud alloy also change the nut selection?
The nut needs compatible internal threads, sufficient engaged height and a specified material condition. Select lubricant or surface treatment with the stud–nut pair, because assembly friction affects the preload obtained from tightening.