Incoloy 825 plate & sheet
ASTM B424
Incoloy 825 plate and sheet provide nickel–chromium–molybdenum–copper corrosion resistance for cut, formed or fabricated components. Thickness, flatness and thermal history determine how the stock becomes a usable cover, liner or structural section.
- MOQ
- 100 kg
- Samples · typical
- ~20 days
- Production · typical
- 25–35 days
- Heat treatment
- Annealed
EN 10204 3.1 MTC + heat-number traceability
Which standard is on your order?
Raw Material Specifications
Heat Treatment
AnnealedThe specified anneal restores ductility and the corrosion-resistant supplied condition after hot or cold working.
What we can make in Alloy 825
Plate
Use for machined covers, tube sheets and equipment plates. Include finishing allowance where machining must remove mill scale or achieve flat gasket and bearing faces.
Sheet
Use for formed covers, ducting and thermal shields where bendability and thickness consistency matter. Surface finish and grain direction can affect visible surfaces and bend quality.
Cut blanks
Use cut profiles to reduce workshop cutting and material waste before fabrication. Hole position, edge finish and heat-affected edges matter when the blank goes directly into forming or welding.
- Size
- Thickness × width × length
- Supply form
- Plate · Sheet · Cut blanks
- Geometry
- Flatness · Squareness · Edges
- Condition
- Grade-specific delivery condition
- Final condition
- Annealed
- Inspection
- Cross-section · Surface · Delivery condition · Heat identity
Supply & preparation
Plate or sheet is prepared as full pieces or cut blanks, with stock condition retained through cutting and identification.
Material condition
The final annealed or specified strengthened condition is linked to the lot; an aging treatment is not assumed for a solid-solution alloy.
Finished geometry
Thickness, flatness, squareness and edge condition determine the usable blank.
Where 825 fits — and what matters
Chemical Processing
Process-equipment covers and shieldsIncoloy 825 plate & sheet are cut and formed into process-equipment covers and shields, support plates or cover blanks. Thickness and flatness set the available section before cutting, bending or joining. Process liquid can remain at the contact after the exposed surface drains.
Pumps, Valves & OEM
Actuator housings and removable equipment coversIncoloy 825 plate & sheet are cut and formed into actuator housings and removable equipment covers, support plates or cover blanks. Thickness and flatness set the available section before cutting, bending or joining. Repeated maintenance makes fit, engagement and access part of the component specification.
Mining & Mineral Processing
Chemical-recovery equipment shieldsIncoloy 825 plate & sheet are cut and formed into chemical-recovery equipment shields, support plates or cover blanks. Thickness and flatness set the available section before cutting, bending or joining. Leach solution and deposits act on the installed part; corrosion duty is separate from abrasive wear.
Same plate & sheet. Different material priorities.
Incoloy 825 material dataHastelloy C-276
Resistance to chemically aggressive, mixed process streams.
- Connection priority
- Plate stiffness or the load carried by a formed section
- Process liquid and shutdown chemistry
- C-276 is selected for its nickel–chromium–molybdenum–tungsten chemistry. Residual product, cleaning liquid and oxidising contamination can expose a sheltered connection differently from the main flow. Include liquid retained at formed corners, cut edges and welded seams in the exposure description.
Inconel 625
Solid-solution strength and resistance to aggressive process liquids.
- Connection priority
- Plate stiffness or the load carried by a formed section
- Annealed or solution-annealed 625
- The delivery condition affects strength and high-temperature response. Keep the specified condition with the component’s mechanical acceptance; 718-style aging is not the strengthening route for 625. Include liquid retained at formed corners, cut edges and welded seams in the exposure description.
Hastelloy C-22
Corrosion resistance across oxidising and reducing process exposures.
- Connection priority
- Plate stiffness or the load carried by a formed section
- Production and cleaning cycles
- C-22’s chromium-bearing chemistry is relevant when chemical exposure changes between operating and cleaning cycles. Include both liquids when comparing it with C-276 or a B-type nickel alloy. Include liquid retained at formed corners, cut edges and welded seams in the exposure description.
From drawing to documented delivery
- 01Drawing & BOMForm, dimensions and quantity
- 02Material & formingGrade, heat and manufacturing route
- 03Final inspectionGeometry, threads and ordered tests
- 04Documents & dispatchLot records and identified packing
Order documents
- Material identity
- UNS N08825 · heat number · ordered condition
- Stock acceptance
- Grade chemistry, supplied condition and ordered mechanical requirements.
- Dimensional record
- Cross-section · Surface · Delivery condition · Heat identity
- Traceability
- EN 10204 3.1 material certificate · production lot · identified packing
Build your 825 plate & sheet enquiry
Questions about 825 plate & sheet
Which stock details matter beyond alloy and thickness?
Flatness, surface finish, edge preparation and any directional forming requirement influence the usable component. A cut blank also needs a heat identity that survives separation from the original sheet or plate.