Incoloy 800 Stud, nut & washer sets
ASME B18.31.2ASTM B408
Incoloy 800 stud, nut and washer sets carry the connection from tensile member to bearing surface. Heat and oxidation resistance for thermal equipment must be matched by suitable nut engagement and washer bearing strength.
- MOQ
- 100PCS
- Samples · typical
- ~20 days
- Production · typical
- 25–35 days
- Heat treatment
- Annealed
EN 10204 3.1 MTC + heat-number traceability
Which standard is on your order?
Raw Material Specifications
Threads · Metric
Threads · Inch
Dimension Reference
Heat Treatment
AnnealedAnnealing reduces work hardening and restores ductility for the specified supplied condition.
What we can make in Alloy 800
Stud
Include both washers when calculating the clamped stack and usable stud projection. Their thickness can change the stud length needed to engage both nuts.
Nuts
Pair the nut grade, proof load and thread fit with the stud for the intended clamp load. Heavy-hex nuts also need enough radial clearance for the installation socket.
Washers
Use washers to provide the specified bearing footprint or replaceable seating surface. Bore clearance must accommodate the stud, while thickness must support the opening beneath the washer.
- Grade pairing
- Stud + two nuts + washers
- Grade pairing
- Metric · UNC · UNF · 8UN · UNJ
- Grade pairing
- Component-by-component grades
- Grade pairing
- Heat and batch identification
- Final condition
- Annealed
- Inspection
- Component count · Mating thread fit · Individual dimensions
Manufacturing route
Studs, nuts and washers are manufactured and inspected as separate components before the specified quantities are packed as a set.
Heat treatment & final condition
The ordered annealed or solution-treated state is retained in the lot record; forming and machining do not replace the specified thermal condition.
Finished geometry
Thread engagement, nut pattern and component grades are checked together. Each component retains its heat or batch identity in the set documentation.
Where 800 fits — and what matters
Furnaces & Heat Treatment
Retort and furnace-access coversIncoloy 800 stud, nut & washer sets bring the studs, mating nuts and specified bearing washers together for retort and furnace-access covers. The washer stack is included in the required usable stud length. Hot dwell, thermal expansion and repeated furnace cycles set the working load.
Power & Turbines
Hot-gas access covers and inspection closuresIncoloy 800 stud, nut & washer sets bring the studs, mating nuts and specified bearing washers together for hot-gas access covers and inspection closures. The washer stack is included in the required usable stud length. Hot dwell and start-stop expansion act on the supported or moving component.
Chemical Processing
Reformer access covers and hot-gas inspection closuresIncoloy 800 stud, nut & washer sets bring the studs, mating nuts and specified bearing washers together for reformer access covers and hot-gas inspection closures. The washer stack is included in the required usable stud length. These parts work in the heated equipment zone, where sustained loading and thermal expansion govern their section and clearance.
Same stud, nut & washer set. Different material priorities.
Incoloy 800 material dataIncoloy 800
UNS N08800 · Current grade- Carbon
- ≤0.10%
- What changes
- General heat and oxidation resistance; no grain-size requirement in the family comparison.
Incoloy 800H
UNS N08810- Carbon
- 0.05–0.10%
- What changes
- Controlled carbon and coarse-grain condition for creep and stress-rupture duty.
Incoloy 800HT
UNS N08811- Carbon
- 0.06–0.10%
- What changes
- Tighter carbon and Al + Ti control (0.85–1.20%), with solution treatment and coarse grain for creep duty.
From drawing to documented delivery
- 01Drawing & BOMForm, dimensions and quantity
- 02Material & formingGrade, heat and manufacturing route
- 03Final inspectionGeometry, threads and ordered tests
- 04Documents & dispatchLot records and identified packing
Order documents
- Material identity
- UNS N08800 · heat number · ordered condition
- Final-part acceptance
- Grade chemistry, supplied condition and ordered mechanical requirements.
- Dimensional record
- Component count · Mating thread fit · Individual dimensions
- Traceability
- EN 10204 3.1 material certificate · production lot · identified packing
Build your 800 stud, nut & washer set enquiry
Questions about 800 stud, nut & washer sets
Can all components be accepted from the stud certificate?
Each component has its own job and material lot. The nut needs thread and strength acceptance, and the washer needs bearing geometry and the ordered condition; retain those records with the stud’s documentation.