316L Fully threaded stud & nut sets
ASME B18.31.2
A 316L stud-and-nut set brings molybdenum-bearing stainless performance in wet equipment to the complete threaded connection. The stud and two nuts retain separate material conditions, thread checks and lot identities within one BOM.
- MOQ
- 100PCS
- Samples · typical
- ~20 days
- Production · typical
- 25–35 days
- Heat treatment
- Solution annealed
EN 10204 3.1 MTC + heat-number traceability
Which standard is on your order?
Raw Material Specifications
Finished-Component Specifications
Threads · Metric
Threads · Inch
Dimension Reference
Heat Treatment
Solution annealed; cold worked for strengthened conditionsSolution annealing restores a ductile corrosion-resistant structure, while specified cold work raises strength without precipitation aging.
What we can make in 316L
Stud
Finished stud length covers the flange stack, gasket and both nut engagements. Full-length thread permits nut positioning from either end for cover removal and flange assembly.
Nuts
Match nut thread class and proof-load requirements to the stud. Regular and heavy-hex patterns need different socket clearances and bearing footprints around the flange holes.
- Grade pairing
- Stud + two nuts
- Grade pairing
- Metric · UNC · UNF · 8UN · UNJ
- Grade pairing
- Component-by-component grades
- Grade pairing
- Heat and batch identification
- Final condition
- Solution annealed · Cold worked
- Inspection
- Component count · Mating thread fit · Individual dimensions
Manufacturing route
Studs, nuts and washers are manufactured and inspected as separate components before the specified quantities are packed as a set.
Heat treatment & final condition
The final annealed or specified strengthened condition is linked to the lot; an aging treatment is not assumed for a solid-solution alloy.
Finished geometry
Thread engagement, nut pattern and component grades are checked together. Each component retains its heat or batch identity in the set documentation.
Where 316L fits — and what matters
Food & Beverage Equipment
Washdown pump housings and removable covers316L fully threaded stud & nut sets supply the stud and two mating nuts for washdown pump housings and removable covers as one assembly line item. Thread fit, nut pattern and stud length are coordinated before packing. Cleaning liquid can remain under the part; exposed finish and access for cleaning matter at the assembled joint.
Water Treatment & Desalination
Filter housings and treatment-pump covers316L fully threaded stud & nut sets supply the stud and two mating nuts for filter housings and treatment-pump covers as one assembly line item. Thread fit, nut pattern and stud length are coordinated before packing. The water stream, cleaning cycle and retained liquid define exposure at the installed part.
Pumps, Valves & OEM
Pump casings and valve bonnets316L fully threaded stud & nut sets supply the stud and two mating nuts for pump casings and valve bonnets as one assembly line item. Thread fit, nut pattern and stud length are coordinated before packing. Repeated maintenance makes fit, engagement and access part of the component specification.
Same stud & nut set. Different material priorities.
316L material data17-4 PH
Aging-controlled strength and hardness.
- Connection priority
- Preload shared by the stud and its mating nuts
- H900 versus H1150
- The aging condition changes the balance of strength, hardness and toughness. A replacement part needs the specified H condition, especially where contact wear and shock load occur together.
Inconel 625
Solid-solution strength and resistance to aggressive process liquids.
- Connection priority
- Preload shared by the stud and its mating nuts
- Annealed or solution-annealed 625
- The delivery condition affects strength and high-temperature response. Keep the specified condition with the component’s mechanical acceptance; 718-style aging is not the strengthening route for 625. Include liquid retained at the stud threads, two nut engagements and bearing seats in the exposure description.
Duplex 2205
Duplex strength and chloride-corrosion resistance.
- Connection priority
- Preload shared by the stud and its mating nuts
- S31803 or S32205
- The specified UNS fixes the chemistry. Solution treatment, section size and the ordered mechanical or corrosion tests establish the final duplex condition. Include liquid retained at the stud threads, two nut engagements and bearing seats in the exposure description.
From drawing to documented delivery
- 01Drawing & BOMForm, dimensions and quantity
- 02Material & formingGrade, heat and manufacturing route
- 03Final inspectionGeometry, threads and ordered tests
- 04Documents & dispatchLot records and identified packing
Order documents
- Material identity
- UNS S31603 · heat number · ordered condition
- Final-part acceptance
- Grade chemistry, supplied condition and ordered mechanical requirements.
- Dimensional record
- Component count · Mating thread fit · Individual dimensions
- Traceability
- EN 10204 3.1 material certificate · production lot · identified packing
Matching Kit
Flange Stud Bolt Kits
Build your 316L stud & nut set enquiry
Questions about 316L fully threaded stud & nut sets
What makes a set traceable rather than simply bagged together?
The stud and each nut lot retain their material and production identities. Component counts, mating thread checks and final conditions are recorded against the set’s BOM.