Titanium Grade 5 plate & sheet
ASTM B265
Titanium Grade 5 plate and sheet provide higher strength than commercially pure titanium at low density for cut, formed or fabricated components. Thickness, flatness and thermal history determine how the stock becomes a usable cover, liner or structural section.
- MOQ
- 100 kg
- Samples · typical
- ~20 days
- Production · typical
- 25–35 days
- Heat treatment
- Annealed
EN 10204 3.1 MTC + heat-number traceability
Which standard is on your order?
Raw Material Specifications
Heat Treatment
AnnealedAnnealing reduces working stresses and restores ductility, with atmosphere and surface control limiting contamination during heating.
What we can make in Titanium Grade 5
Plate
Use for machined covers, tube sheets and equipment plates. Include finishing allowance where machining must remove mill scale or achieve flat gasket and bearing faces.
Sheet
Use for formed covers, ducting and thermal shields where bendability and thickness consistency matter. Surface finish and grain direction can affect visible surfaces and bend quality.
Cut blanks
Use cut profiles to reduce workshop cutting and material waste before fabrication. Hole position, edge finish and heat-affected edges matter when the blank goes directly into forming or welding.
- Size
- Thickness × width × length
- Supply form
- Plate · Sheet · Cut blanks
- Geometry
- Flatness · Squareness · Edges
- Condition
- Grade-specific delivery condition
- Final condition
- Annealed
- Inspection
- Cross-section · Surface · Delivery condition · Heat identity
Supply & preparation
Plate or sheet is prepared as full pieces or cut blanks, with stock condition retained through cutting and identification.
Material condition
Forming and thermal processing require contamination control. The final surface is cleaned before dimensional and material acceptance.
Finished geometry
Thickness, flatness, squareness and edge condition determine the usable blank.
Where Titanium Grade 5 fits — and what matters
Industrial Machinery & Automation
Machine guards and instrument panelsTitanium Grade 5 plate & sheet are cut and formed into machine guards and instrument panels, support plates or cover blanks. Thickness and flatness set the available section before cutting, bending or joining. Alignment, operating cycles and replacement access define the working interface.
Pumps, Valves & OEM
Actuator housings and removable equipment coversTitanium Grade 5 plate & sheet are cut and formed into actuator housings and removable equipment covers, support plates or cover blanks. Thickness and flatness set the available section before cutting, bending or joining. Repeated maintenance makes fit, engagement and access part of the component specification.
Automotive & EV Manufacturing Equipment
Production-machine guards and sensor panelsTitanium Grade 5 plate & sheet are cut and formed into production-machine guards and sensor panels, support plates or cover blanks. Thickness and flatness set the available section before cutting, bending or joining. Repeated tooling changes require consistent seating and repeatable assembly dimensions.
Same plate & sheet. Different material priorities.
Titanium Grade 5 material dataTitanium Grade 2
Low mass, corrosion resistance and commercially pure titanium formability.
- Connection priority
- Plate stiffness or the load carried by a formed section
- Commercially pure titanium
- Grade 2 favours corrosion resistance and forming characteristics over the higher strength of Grade 5. Mating-metal contact, surface condition and assembly friction remain part of the connection design. Include liquid retained at formed corners, cut edges and welded seams in the exposure description.
Inconel 718
Precipitation-hardened strength for compact, highly loaded connections.
- Connection priority
- Plate stiffness or the load carried by a formed section
- Strength after aging
- Machine-stock properties and final aged properties describe different states. The final heat-treatment lot and mechanical results establish the strength available in the installed part. At formed corners, cut edges and welded seams, the relevant metal temperature can differ from the process or furnace set point.
From drawing to documented delivery
- 01Drawing & BOMForm, dimensions and quantity
- 02Material & formingGrade, heat and manufacturing route
- 03Final inspectionGeometry, threads and ordered tests
- 04Documents & dispatchLot records and identified packing
Order documents
- Material identity
- UNS R56400 · heat number · ordered condition
- Stock acceptance
- Grade chemistry, surface condition and the ordered mechanical requirements.
- Dimensional record
- Cross-section · Surface · Delivery condition · Heat identity
- Traceability
- EN 10204 3.1 material certificate · production lot · identified packing
Build your Titanium Grade 5 plate & sheet enquiry
Questions about Titanium Grade 5 plate & sheet
Which stock details matter beyond alloy and thickness?
Flatness, surface finish, edge preparation and any directional forming requirement influence the usable component. A cut blank also needs a heat identity that survives separation from the original sheet or plate.