Titanium Grade 2 round bar
ASTM B348
Titanium Grade 2 round bar supplies low mass, corrosion resistance and commercially pure titanium formability to machined shafts, retainers and fastening parts. Diameter allowance and delivery condition determine the route from stock to the final loaded section.
- MOQ
- 100 kg
- Samples · typical
- ~20 days
- Production · typical
- 25–35 days
- Heat treatment
- Annealed
EN 10204 3.1 MTC + heat-number traceability
Which standard is on your order?
Raw Material Specifications
Heat Treatment
AnnealedAnnealing reduces working stresses and restores ductility, with atmosphere and surface control limiting contamination during heating.
What we can make in Titanium Grade 2
Full-length bar
Use for repeated turning of shafts, studs and valve components from one heat-traceable stock length. Bar diameter must include machining allowance for the finished surface and straightness.
Cut blank
Use saw-cut blanks for short-run machining or forging starts. Cutting allowance and end squareness affect how much usable length remains after facing.
- Section
- Solid round
- Size
- Diameter × length
- Surface
- Turned · Ground · Drawn
- Supply form
- Bars · Cut pieces
- Final condition
- Annealed
- Inspection
- Cross-section · Surface · Delivery condition · Heat identity
Supply & preparation
Cut lengths preserve the heat identity of the original bar. Turning or grinding allowance follows the required finished diameter.
Material condition
Forming and thermal processing require contamination control. The final surface is cleaned before dimensional and material acceptance.
Finished geometry
Diameter, straightness, surface condition and cut length are checked against the stock order.
Where Titanium Grade 2 fits — and what matters
Chemical Processing
Pump shafts and mixer-drive partsTitanium Grade 2 round bar provides machining stock for pump shafts and mixer-drive parts, including turned shoulders, bearing seats and threaded ends. Bar diameter includes the allowance for finishing the final part. Process liquid can remain at the contact after the exposed surface drains.
Pumps, Valves & OEM
Valve stems and pump-drive collarsTitanium Grade 2 round bar provides machining stock for valve stems and pump-drive collars, including turned shoulders, bearing seats and threaded ends. Bar diameter includes the allowance for finishing the final part. Repeated maintenance makes fit, engagement and access part of the component specification.
Mining & Mineral Processing
Dosing-pump shafts and agitator-drive partsTitanium Grade 2 round bar provides machining stock for dosing-pump shafts and agitator-drive parts, including turned shoulders, bearing seats and threaded ends. Bar diameter includes the allowance for finishing the final part. Leach solution and deposits act on the installed part; corrosion duty is separate from abrasive wear.
Same round bar. Different material priorities.
Titanium Grade 2 material dataHastelloy C-276
Resistance to chemically aggressive, mixed process streams.
- Connection priority
- The mechanical requirement of the machined section
- Process liquid and shutdown chemistry
- C-276 is selected for its nickel–chromium–molybdenum–tungsten chemistry. Residual product, cleaning liquid and oxidising contamination can expose a sheltered connection differently from the main flow. Include liquid retained at the machined diameter and cut surfaces of the future part in the exposure description.
Inconel 625
Solid-solution strength and resistance to aggressive process liquids.
- Connection priority
- The mechanical requirement of the machined section
- Annealed or solution-annealed 625
- The delivery condition affects strength and high-temperature response. Keep the specified condition with the component’s mechanical acceptance; 718-style aging is not the strengthening route for 625. Include liquid retained at the machined diameter and cut surfaces of the future part in the exposure description.
Hastelloy C-22
Corrosion resistance across oxidising and reducing process exposures.
- Connection priority
- The mechanical requirement of the machined section
- Production and cleaning cycles
- C-22’s chromium-bearing chemistry is relevant when chemical exposure changes between operating and cleaning cycles. Include both liquids when comparing it with C-276 or a B-type nickel alloy. Include liquid retained at the machined diameter and cut surfaces of the future part in the exposure description.
From drawing to documented delivery
- 01Drawing & BOMForm, dimensions and quantity
- 02Material & formingGrade, heat and manufacturing route
- 03Final inspectionGeometry, threads and ordered tests
- 04Documents & dispatchLot records and identified packing
Order documents
- Material identity
- UNS R50400 · heat number · ordered condition
- Stock acceptance
- Grade chemistry, surface condition and the ordered mechanical requirements.
- Dimensional record
- Cross-section · Surface · Delivery condition · Heat identity
- Traceability
- EN 10204 3.1 material certificate · production lot · identified packing
Build your Titanium Grade 2 round bar enquiry
Questions about Titanium Grade 2 round bar
Is the bar condition the same as the finished-part condition?
Not necessarily. A solution-treated or annealed blank may be selected for machining before a specified final treatment. Stock and finished-part mechanical records need to identify the conditions they represent.