Hastelloy C-276 Long-shank flange bolts
ISO 4162ASTM B574
The long grip and integral bearing flange give Hastelloy C-276 bolts two distinct interfaces to control. Resistance to chemically aggressive, mixed process streams must be paired with the required shank length, flange footprint and final condition.
- MOQ
- 100PCS
- Samples · typical
- ~20 days
- Production · typical
- 25–35 days
- Heat treatment
- Solution annealed
EN 10204 3.1 MTC + heat-number traceability
Which standard is on your order?
Raw Material Specifications
Finished-Bolt Specifications
Threads · Metric
Threads · Inch
Dimension Reference
Heat Treatment
Solution annealedSolution annealing dissolves detrimental precipitates, followed by rapid cooling to preserve corrosion resistance.
What we can make in Hastelloy C-276
Flanged head
Use on deep mounting brackets and thick equipment stacks where a wide head seat distributes the clamp load. Check the flange diameter against casting recesses and nearby ribs before specifying a larger head.
Extended grip
The extended plain grip can span spacers and thick components while the thread engages beyond them. Match grip length to the assembled stack so the nut can reach its seat without stopping at the thread runout.
- Head
- Integral flange
- Shank
- Extended plain grip
- Length basis
- Under flange
- Threads
- Metric · UNC · UNF · UNJ
- Final condition
- Solution annealed
- Inspection
- Thread gauges · Head and shank dimensions
Manufacturing route
CNC machining suits samples and small lots. Cold heading or hot forging is selected for volume production according to alloy formability, head section and size.
Heat treatment & final condition
The final annealed or specified strengthened condition is linked to the lot; an aging treatment is not assumed for a solid-solution alloy.
Finished geometry
Head geometry, bearing face, shank and thread fit are checked after the final machining and thermal operations.
Where C-276 fits — and what matters
Chemical Processing
Mixer drives and process-equipment bracketsHastelloy C-276 long-shank flange bolts span thick spacers or mounting sections in mixer drives and process-equipment brackets, combining an extended grip with a flange bearing face. Process liquid can remain at the contact after the exposed surface drains.
Pumps, Valves & OEM
Actuator mounts and pump baseplatesHastelloy C-276 long-shank flange bolts span thick spacers or mounting sections in actuator mounts and pump baseplates, combining an extended grip with a flange bearing face. Repeated maintenance makes fit, engagement and access part of the component specification.
Mining & Mineral Processing
Leach-equipment and dosing-skid supportsHastelloy C-276 long-shank flange bolts span thick spacers or mounting sections in leach-equipment and dosing-skid supports, combining an extended grip with a flange bearing face. Leach solution and deposits act on the installed part; corrosion duty is separate from abrasive wear.
Same long-shank flange bolt. Different material priorities.
Hastelloy C-276 material dataInconel 625
Solid-solution strength and resistance to aggressive process liquids.
- Connection priority
- Grip tension and distributed bearing at the flange
- Annealed or solution-annealed 625
- The delivery condition affects strength and high-temperature response. Keep the specified condition with the component’s mechanical acceptance; 718-style aging is not the strengthening route for 625. Include liquid retained at the extended grip and the covered surface under the flange in the exposure description.
Hastelloy C-22
Corrosion resistance across oxidising and reducing process exposures.
- Connection priority
- Grip tension and distributed bearing at the flange
- Production and cleaning cycles
- C-22’s chromium-bearing chemistry is relevant when chemical exposure changes between operating and cleaning cycles. Include both liquids when comparing it with C-276 or a B-type nickel alloy. Include liquid retained at the extended grip and the covered surface under the flange in the exposure description.
Titanium Grade 2
Low mass, corrosion resistance and commercially pure titanium formability.
- Connection priority
- Grip tension and distributed bearing at the flange
- Commercially pure titanium
- Grade 2 favours corrosion resistance and forming characteristics over the higher strength of Grade 5. Mating-metal contact, surface condition and assembly friction remain part of the connection design. Include liquid retained at the extended grip and the covered surface under the flange in the exposure description.
From drawing to documented delivery
- 01Drawing & BOMForm, dimensions and quantity
- 02Material & formingGrade, heat and manufacturing route
- 03Final inspectionGeometry, threads and ordered tests
- 04Documents & dispatchLot records and identified packing
Order documents
- Material identity
- UNS N10276 · heat number · ordered condition
- Final-part acceptance
- Grade chemistry, supplied condition and ordered mechanical requirements.
- Dimensional record
- Thread gauges · Head and shank dimensions
- Traceability
- EN 10204 3.1 material certificate · production lot · identified packing
Build your C-276 long-shank flange bolt enquiry
Questions about C-276 long-shank flange bolts
Which dimensions keep the flange and long grip working together?
The flange seat fixes one end of the stack; plain grip and runout fix where the threaded section begins. Specify both against the actual stack thickness so the nut tightens on the parts rather than reaching the end of usable thread.