Monel K-500 strip
ISO 6208
Monel K-500 strip combines age-hardened strength in the nickel–copper alloy family with a thin section for clips, shims and formed parts. Edge condition, temper and rolling direction affect both production feeding and the finished bend.
- MOQ
- 100 kg
- Samples · typical
- ~20 days
- Production · typical
- 25–35 days
- Heat treatment
- Annealed / age hardened
EN 10204 3.1 MTC + heat-number traceability
Which standard is on your order?
Raw Material Specifications
Heat Treatment
Annealed or age hardenedAnnealing provides a workable starting condition, while controlled aging develops the higher strength specified for age-hardened K-500.
What we can make in Monel K-500
Coiled strip
Use for progressive stamping, spring clips and repeated forming. Strip width, thickness and coil dimensions must suit the tool and feed line to maintain consistent component geometry.
Cut lengths
Use for short-run brackets, shims and fabricated pieces when coil handling adds unnecessary setup. Flatness and length tolerance help the blank seat consistently in the tool.
Edge & camber
For narrow stamped or formed parts, control slit-edge burrs to protect tools and contact surfaces. Excess camber pulls the strip away from the intended feed path and affects registration.
- Size
- Thickness × width
- Supply form
- Coils · Cut lengths
- Edges
- Slit · Finished edges
- Condition
- Grade-specific temper
- Final condition
- Annealed · age hardened
- Inspection
- Cross-section · Surface · Delivery condition · Heat identity
Supply & preparation
Slitting and cut-length preparation follow the requested width, thickness and edge condition. Rolling direction is retained where the forming drawing needs it.
Material condition
Solution treatment and the specified aging condition are recorded against the production lot; final dimensions are checked after thermal processing.
Finished geometry
Thickness variation, edge burr, coil set and surface finish determine suitability for the next stamping or forming step.
Where K-500 fits — and what matters
Offshore & Marine
Seawater pump and cooling-system coversMonel K-500 strip is slit and formed into shims, retaining clips or seal-support pieces around seawater pump and cooling-system covers. Thickness, edge finish and bend direction control the finished fit. The assembled contact is exposed to saltwater, deposits and neighbouring metals.
Water Treatment & Desalination
Filter housings and treatment-pump coversMonel K-500 strip is slit and formed into shims, retaining clips or seal-support pieces around filter housings and treatment-pump covers. Thickness, edge finish and bend direction control the finished fit. The water stream, cleaning cycle and retained liquid define exposure at the installed part.
Oil & Gas
Process valves and equipment closuresMonel K-500 strip is slit and formed into shims, retaining clips or seal-support pieces around process valves and equipment closures. Thickness, edge finish and bend direction control the finished fit. Utility connections and pressure-boundary parts have separate acceptance requirements on the equipment drawing.
Same strip. Different material priorities.
Monel K-500 material dataInconel 625
Solid-solution strength and resistance to aggressive process liquids.
- Connection priority
- The stiffness and recovery of the formed strip section
- Annealed or solution-annealed 625
- The delivery condition affects strength and high-temperature response. Keep the specified condition with the component’s mechanical acceptance; 718-style aging is not the strengthening route for 625. Include liquid retained at slit edges, overlap faces and highly strained bends in the exposure description.
Super Duplex 2507
Super-duplex strength and resistance to chloride pitting.
- Connection priority
- The stiffness and recovery of the formed strip section
- Final duplex structure
- S32750 chemistry and final solution treatment belong together. Forming, section size and cooling affect the structure represented by the mechanical and corrosion records. Include liquid retained at slit edges, overlap faces and highly strained bends in the exposure description.
Duplex 2205
Duplex strength and chloride-corrosion resistance.
- Connection priority
- The stiffness and recovery of the formed strip section
- S31803 or S32205
- The specified UNS fixes the chemistry. Solution treatment, section size and the ordered mechanical or corrosion tests establish the final duplex condition. Include liquid retained at slit edges, overlap faces and highly strained bends in the exposure description.
From drawing to documented delivery
- 01Drawing & BOMForm, dimensions and quantity
- 02Material & formingGrade, heat and manufacturing route
- 03Final inspectionGeometry, threads and ordered tests
- 04Documents & dispatchLot records and identified packing
Order documents
- Material identity
- UNS N05500 · heat number · ordered condition
- Stock acceptance
- Lot-linked aging record and mechanical acceptance in the final condition.
- Dimensional record
- Cross-section · Surface · Delivery condition · Heat identity
- Traceability
- EN 10204 3.1 material certificate · production lot · identified packing
Build your K-500 strip enquiry
Questions about K-500 strip
Why does edge condition belong on a strip order?
A slit edge can become the most highly strained edge during forming. Burr direction, edge finish and the chosen bend radius affect the next operation and the finished contact surface.