Hastelloy C-22 Long-shank hex head bolts
ISO 4014ASTM B574
Hastelloy C-22 long-shank hex bolts carry the grip through a plain section while providing corrosion resistance across oxidising and reducing process exposures. Grip length and thread runout locate the loaded interfaces along the extended shank.
- MOQ
- 100PCS
- Samples · typical
- ~20 days
- Production · typical
- 25–35 days
- Heat treatment
- Solution annealed
EN 10204 3.1 MTC + heat-number traceability
Which standard is on your order?
Raw Material Specifications
Threads · Metric
Threads · Inch
Dimension Reference
Heat Treatment
Solution annealedSolution annealing dissolves detrimental precipitates, followed by rapid cooling to preserve corrosion resistance.
What we can make in Hastelloy C-22
Plain grip section
Use across thick equipment flanges, spacers and mounting stacks where the grip requires a continuous plain shank. The grip length keeps the threaded transition beyond the intended bearing or shear section.
Threaded end
Allow enough usable thread beyond the stack for the nut, washer and tightening travel. Too little thread can leave the nut bottomed on the plain shank before the joint is clamped.
Long shank vs shoulder screw
For a pivot or locating bore, specify the actual shank diameter tolerance and surface finish. A long-shank bolt provides grip length; a shoulder-screw fit requires separate control of the locating surface.
- Head
- External hex
- Shank
- Extended plain length
- Length basis
- Under head
- Threads
- Metric · UNC · UNF · UNJ
- Final condition
- Solution annealed
- Inspection
- Thread gauges · Head and shank dimensions
Manufacturing route
CNC machining suits samples and small lots. Cold heading or hot forging is selected for volume production according to alloy formability, head section and size.
Heat treatment & final condition
The final annealed or specified strengthened condition is linked to the lot; an aging treatment is not assumed for a solid-solution alloy.
Finished geometry
Head geometry, bearing face, shank and thread fit are checked after the final machining and thermal operations.
Where C-22 fits — and what matters
Chemical Processing
Mixer drives and process-equipment bracketsHastelloy C-22 long-shank hex head bolts pass through the deeper grip of mixer drives and process-equipment brackets; the extended plain shank locates the joint before the nut takes up the thread. Process liquid can remain at the contact after the exposed surface drains.
Pumps, Valves & OEM
Actuator mounts and pump baseplatesHastelloy C-22 long-shank hex head bolts pass through the deeper grip of actuator mounts and pump baseplates; the extended plain shank locates the joint before the nut takes up the thread. Repeated maintenance makes fit, engagement and access part of the component specification.
Mining & Mineral Processing
Leach-equipment and dosing-skid supportsHastelloy C-22 long-shank hex head bolts pass through the deeper grip of leach-equipment and dosing-skid supports; the extended plain shank locates the joint before the nut takes up the thread. Leach solution and deposits act on the installed part; corrosion duty is separate from abrasive wear.
Same long-shank hex head bolt. Different material priorities.
Hastelloy C-22 material dataHastelloy C-276
Resistance to chemically aggressive, mixed process streams.
- Connection priority
- Tension and thermal expansion along the extended shank
- Process liquid and shutdown chemistry
- C-276 is selected for its nickel–chromium–molybdenum–tungsten chemistry. Residual product, cleaning liquid and oxidising contamination can expose a sheltered connection differently from the main flow. Include liquid retained at the long grip inside the joint and the under-head seat in the exposure description.
Inconel 625
Solid-solution strength and resistance to aggressive process liquids.
- Connection priority
- Tension and thermal expansion along the extended shank
- Annealed or solution-annealed 625
- The delivery condition affects strength and high-temperature response. Keep the specified condition with the component’s mechanical acceptance; 718-style aging is not the strengthening route for 625. Include liquid retained at the long grip inside the joint and the under-head seat in the exposure description.
Titanium Grade 2
Low mass, corrosion resistance and commercially pure titanium formability.
- Connection priority
- Tension and thermal expansion along the extended shank
- Commercially pure titanium
- Grade 2 favours corrosion resistance and forming characteristics over the higher strength of Grade 5. Mating-metal contact, surface condition and assembly friction remain part of the connection design. Include liquid retained at the long grip inside the joint and the under-head seat in the exposure description.
From drawing to documented delivery
- 01Drawing & BOMForm, dimensions and quantity
- 02Material & formingGrade, heat and manufacturing route
- 03Final inspectionGeometry, threads and ordered tests
- 04Documents & dispatchLot records and identified packing
Order documents
- Material identity
- UNS N06022 · heat number · ordered condition
- Final-part acceptance
- Grade chemistry, supplied condition and ordered mechanical requirements.
- Dimensional record
- Thread gauges · Head and shank dimensions
- Traceability
- EN 10204 3.1 material certificate · production lot · identified packing
Build your C-22 long-shank hex head bolt enquiry
Questions about C-22 long-shank hex head bolts
Why is total length insufficient for a long-shank bolt?
Two bolts of the same total length can put the thread runout in different places. The joint needs a defined grip length so its bearing or shear interface meets the intended shank section.