Incoloy 800H Hex flange bolts
ISO 4162ASTM B408
An integral flange spreads the bearing load of a Incoloy 800H bolt. Controlled-carbon, coarse-grain performance for creep duty addresses the service exposure; plain or serrated seating determines contact with the supported surface.
- MOQ
- 100PCS
- Samples · typical
- ~20 days
- Production · typical
- 25–35 days
- Heat treatment
- Solution annealed
EN 10204 3.1 MTC + heat-number traceability
Which standard is on your order?
Raw Material Specifications
Threads · Metric
Threads · Inch
Dimension Reference
Heat Treatment
Solution annealedThe specified solution treatment develops the controlled grain structure needed for sustained high-temperature creep duty.
What we can make in Alloy 800H
Integral flange
Use on mounting brackets and equipment covers to distribute head load over a wider seat and reduce loose parts during assembly. The flange needs a flat landing clear of nearby walls and radii.
Plain bearing face
Choose a plain underside for finished or coated seats where teeth would mark the surface. It also permits controlled sliding at the head-seat interface during tightening.
Flange vs loose washer
An integral flange speeds repeated assembly by keeping the bearing surface with the bolt. Retain a separate washer when the joint needs a replaceable wear face or a specifically hardened bearing layer.
- Head
- Hex drive · Integral flange
- Bearing face
- Plain or specified surface profile
- Length basis
- Under flange
- Threads
- Metric · UNC · UNF · UNJ
- Final condition
- Solution annealed
- Inspection
- Thread gauges · Head and shank dimensions
Manufacturing route
CNC machining suits samples and small lots. Cold heading or hot forging is selected for volume production according to alloy formability, head section and size.
Heat treatment & final condition
The final solution-treated condition and grain-size requirement are recorded for the ordered H or HT grade. Final dimensions are inspected after the last thermal operation.
Finished geometry
Head geometry, bearing face, shank and thread fit are checked after the final machining and thermal operations.
Where 800H fits — and what matters
Furnaces & Heat Treatment
Heat-treatment fixturesIncoloy 800H hex flange bolts clamp heat-treatment fixtures through an integral flange that spreads head load over the mounting face. Hot dwell, thermal expansion and repeated furnace cycles set the working load.
Power & Turbines
Boiler-duct supports and hot auxiliary bracketsIncoloy 800H hex flange bolts clamp boiler-duct supports and hot auxiliary brackets through an integral flange that spreads head load over the mounting face. Hot dwell and start-stop expansion act on the supported or moving component.
Chemical Processing
Reformer tube-support and heater fixturesIncoloy 800H hex flange bolts clamp reformer tube-support and heater fixtures through an integral flange that spreads head load over the mounting face. These parts work in the heated equipment zone, where sustained loading and thermal expansion govern their section and clearance.
Same hex flange bolt. Different material priorities.
Incoloy 800H material dataIncoloy 800
UNS N08800- Carbon
- ≤0.10%
- What changes
- General heat and oxidation resistance; no grain-size requirement in the family comparison.
Incoloy 800H
UNS N08810 · Current grade- Carbon
- 0.05–0.10%
- What changes
- Controlled carbon and coarse-grain condition for creep and stress-rupture duty.
Incoloy 800HT
UNS N08811- Carbon
- 0.06–0.10%
- What changes
- Tighter carbon and Al + Ti control (0.85–1.20%), with solution treatment and coarse grain for creep duty.
From drawing to documented delivery
- 01Drawing & BOMForm, dimensions and quantity
- 02Material & formingGrade, heat and manufacturing route
- 03Final inspectionGeometry, threads and ordered tests
- 04Documents & dispatchLot records and identified packing
Order documents
- Material identity
- UNS N08810 · heat number · ordered condition
- Final-part acceptance
- UNS grade, carbon and alloy chemistry, solution-treatment record and ordered grain-size evidence.
- Dimensional record
- Thread gauges · Head and shank dimensions
- Traceability
- EN 10204 3.1 material certificate · production lot · identified packing
Build your 800H hex flange bolt enquiry
Questions about 800H hex flange bolts
Can the flange replace a separate washer?
Only when its bearing footprint and the supported surface meet the assembly requirement. A serrated seat can damage a coating, while a thin or slotted member may need a different bearing arrangement.