Typical MOQ
10pieces
Subject to product and material review.
Conditions
MOQ is typically 10 pieces, subject to product, material and manufacturing-route review.
Zirconium 702 Hex Bolts
MaterialZirconium 702Change · 45 grades
- Material
- Zirconium 702 · UNS R60702 · Zr 702
- Material focus
- Chemical-process corrosion resistance
- Common applications
- Chemical-process equipment · acid-handling components
- Main elementsComposition limits · wt.%
- Zr + Hf ≥99.2%
- Hf ≤4.5%
Standards & threads
Finished boltDrawing-defined acceptanceNo grade-specific finished-bolt specification was established in the reviewed sources.
Define final mechanical acceptance, traceability and contamination / handling requirements for unalloyed zirconium 702.
The reviewed F468 nickel/titanium routes are not assigned to zirconium. A B550 material certificate does not replace testing of the finished bolt.
Raw material specificationASTM B550/B550MUNS R60702
R60702 · zirconium bar and wire
Specify the exact grade and material condition; B551 plate is a separate form.
Dimensions · metricISO 4014 / ISO 4017Coarse pitch · partial-thread bolts / full-thread hex screws
Dimensions · inchASME B18.2.1Inch hex bolts / hex cap screws
Select the bolt or cap-screw pattern, head dimensions and thread length. Hex and heavy hex are different choices.
Threads · metricISO 261 / ISO 965-1Metric M · pitch plan and tolerance system
Threads · UNC / UNFASME B1.1Unified inch · coarse / fine series
State diameter, TPI, series and external class: e.g. 1/2-13 UNC-2A or 1/2-20 UNF-2A. Select 2A / 3A with the mating-thread fit; UNC and UNF do not mate.
Mechanical testing ASTM F606/F606M
Mechanical test methods for fasteners; select applicable tensile, yield and hardness tests. This standard supplies methods, not a material grade or pass/fail limits. Define those limits and sampling in the part specification.
Test-method reference ↗Sources & editions Reviewed 2026-10-19
Historical samples support the stated grade coverage. The ordered edition controls the full requirements.
Preview your dimensions
Example dimensions, not a stock size.
Simplified right-hand thread appearance. No tolerance, fit or standard compliance is simulated.
Head dimensions · optional
Head proportions are illustrative: s = 1.5d, k = 0.625d. They are not standard-table values and will not be submitted as specified dimensions.
Quality documents
Heat number traceability
Every delivery traceable by heat number
Mechanical testing
Included with every delivery
Thread inspection
GO / NO-GO gauging · sampled inspection
Methods, sampling and acceptance criteria follow the agreed specification. PMI, third-party inspection and additional records are agreed separately.
Before production and at delivery
During quotation, a redacted certificate from a previous order can show the document format and recorded tests. It is a historical example, not certification of this product or a new order. Shipment documents must correspond to the material and batch actually supplied.
How to read a historical certificate sample ↗Prepare your enquiry
Send a drawing and quantity.
No drawing? Use these details.
- Size
- d × L Diameter × under-head length
- Quantity
- Pieces Required quantity per size
- Thread
- Metric / UNC / UNF Pitch or TPI + thread class
- Coverage
- Full / Partial For partial, include threaded length
Full material checklist
Process chemistry
Medium, concentration, impurities, cleaning cycle and temperature.
Avoids a broad acid-resistant claim without the actual exposure.
Grade and form
R60702, required B550 / project specification and delivery condition.
Identifies commercially pure 702 and its stock certificate.
Joint requirements
Required strength, mating materials and finished-part inspection.
Adds mechanical and assembly requirements to corrosion-based selection.
Commercial terms
Indicative terms; confirmed in your quotation.
Sample review
~20days
Freight, import duties and taxes are separate.
Conditions
Samples are typically reviewed on an approximately 20-day basis. BYBOLT may cover agreed sample manufacturing; buyer freight, import duties and taxes remain separate.
Production review
25–35days
Urgent requirements can be discussed.
Conditions
Regular production is commonly reviewed on a 25–35 day basis. Urgent requirements can be discussed against the complete specification.
Typical deposit
30%
T/T or LianLian. Balance before dispatch.
Conditions
Payment can be arranged by T/T or LianLian. A typical order uses a 30% deposit, with the balance completed before dispatch.
Technical help
Which material standard applies to Zirconium 702 bolt stock?
B550/B550M identifies R60702 bar and wire. B551 is a separate plate reference. Specify the stock condition, then define the completed bolt’s mechanical acceptance, dimensions, thread and inspection records.
What distinguishes a 702 bolt order from a 705 order?
702 is the unalloyed zirconium grade, while 705 is zirconium-niobium with a different identity. Retain R60702, the specified final properties and any contamination or handling controls on the purchase documents.
Read a thread designation Metric / UNC / UNF
M12 × 1.75–6g12 mm diameter · 1.75 mm pitch · external class 6g
1/2-13 UNC-2A1/2 inch · 13 TPI · coarse · external class 2A
1/2-20 UNF-2A1/2 inch · 20 TPI · fine · external class 2A
Examples explain designations, not available sizes. Specify fine pitch explicitly. UNC and UNF do not mate; full or partial threading is a separate choice.
Thread classes and inspection ↗Related material guides
Download the PO and receiving checklist (PDF)
Guides for your enquiry
Specify your Zirconium 702 bolt
Send a drawing or add your dimensions and quantity.
Continue to enquiry ↗
Combine several products in one enquiry
Zirconium 702 hex boltsEnquire ↗