Alloy 600
N06600
Alloy 600 is a nickel-chromium-iron alloy used for oxidation resistance and selected corrosive environments, including thermal-processing and chemical equipment.
Materials
Start with the grade on your drawing. Supply is reviewed for the exact product form, condition and standard you request.
Alloy 601
N06601
Alloy 601 is an aluminium-containing nickel-chromium-iron alloy noted for high-temperature oxidation resistance. It is a material option for thermal-processing components.
Alloy 625
N06625
Alloy 625 is a nickel-chromium-molybdenum-niobium alloy combining corrosion resistance with strength. It is a material option for chemical and marine components. Specify the product form and required condition when enquiring about fasteners or raw material.
Alloy 718
N07718
Alloy 718 is an age-hardenable nickel-chromium alloy for engineering applications requiring strength and corrosion resistance. Enquiries may cover bolts, studs and drawing-based components, with the required heat-treatment condition stated in the specification.
Alloy X-750
N07750
Alloy X-750 is a precipitation-hardenable nickel-chromium alloy used in springs and elevated-temperature components. Heat treatment must be selected for the product form and service requirement.
Alloy 75
N06075
Alloy 75 is a nickel-chromium alloy considered for oxidation resistance and heat-resistant fabricated components.
Alloy 80A
N07080
Alloy 80A is an age-hardenable nickel-chromium alloy used for elevated-temperature strength and rupture requirements. Product form and treatment are reviewed against the drawing.
Alloy C-276
N10276
Alloy C-276 is a nickel-chromium-molybdenum alloy with tungsten, used in demanding corrosion environments. Material selection depends on the process medium, concentration and temperature. Enquire about corrosion-resistant fasteners and components to your specification.
Alloy C-22
N06022
Alloy C-22 is a nickel-chromium-molybdenum-tungsten alloy considered for oxidising and other aggressive process environments. Selection against C-276 should be based on the actual corrosion conditions.
Alloy B-2
N10665
Alloy B-2 is a nickel-molybdenum corrosion-resistant alloy. Submit the complete process conditions and material specification for review.
Alloy B-3
N10675
Alloy B-3 is a nickel-molybdenum alloy for hydrochloric acid and other reducing media, with improved thermal stability compared with B-2.