EN
EnglishEspañolالعربية
+86 15000800360[email protected]
Material selection

Compare Materials

Choose up to three materials. Compare their properties, reference conditions and specification requirements side by side.

47 matching materials

Nickel AlloysUNS N06601View material details
Nickel-Iron-Chromium AlloysUNS N08810View material details
2 / 3 selected

Scroll horizontally to compare all columns.

Compare Materials: Inconel 601, Incoloy 800H
MaterialInconel 601N06601Incoloy 800HN08810

Summary

Material familyNickel AlloysNickel-Iron-Chromium Alloys
Grade / UNSN06601N08810
SummaryA nickel-chromium-aluminium alloy selected for oxidation resistance in thermal equipment.An iron-nickel-chromium alloy with controlled carbon and grain size for creep resistance.

Performance overview

Material focusHigh-temperature oxidationCreep and rupture resistance
Physical referenceNot documented in this reference
Density
7.94 g/cm³
Melting range
1357–1385 °C
Supplied technical reference · Scanned PDF page 13 · printed page 25
Chemical composition
Chemical composition

Composition limits · wt.%

Ni
58–63
Cr
21–25
Al
1.0–1.7
Fe
Balance
C
≤0.10
Mn
≤1.0
S
≤0.015
Si
≤0.50
Cu
≤1.0
Supplied technical reference · Scanned PDF page 4 · printed page 16
Chemical composition

Composition limits · wt.%

Ni
30–35
Cr
19–23
Fe
≥39.5
C
0.05–0.10
Mn
≤1.5
S
≤0.015
Si
≤1.0
Cu
≤0.75
Al
0.15–0.60
Ti
0.15–0.60
Supplied technical reference · Scanned PDF page 3 · printed page 15

Mechanical properties

Reference conditions vary or are incomplete. Read the basis, condition and source for each column; these values do not establish a performance ranking or finished-fastener acceptance values.

Tensile strength≥552 MPa
Catalogue reference minimums
Not documented in this reference
Not documented in this reference
Supplied technical reference · Scanned PDF page 4 · printed page 16		≥450 MPa
Catalogue reference minimums
Not documented in this reference
Not documented in this reference
Supplied technical reference · Scanned PDF page 3 · printed page 15
0.2% yield strength≥205 MPa
Catalogue reference minimums
Not documented in this reference
Not documented in this reference
Supplied technical reference · Scanned PDF page 4 · printed page 16		≥170 MPa
Catalogue reference minimums
Not documented in this reference
Not documented in this reference
Supplied technical reference · Scanned PDF page 3 · printed page 15
Elongation≥30 %
Catalogue reference minimums
Not documented in this reference
Not documented in this reference
Supplied technical reference · Scanned PDF page 4 · printed page 16		≥30 %
Catalogue reference minimums
Not documented in this reference
Not documented in this reference
Supplied technical reference · Scanned PDF page 3 · printed page 15
Reference conditions
Data basis
Catalogue reference minimums
Condition
Not documented in this reference
Sample form
Not documented in this reference
Sample size
Not documented in this reference
Test temperature
Not documented in this reference
Test method
Not documented in this reference
Test direction
Not documented in this reference
Elongation gauge length
A5, as labelled in supplied table
Data basis
Catalogue reference minimums
Condition
Not documented in this reference
Sample form
Not documented in this reference
Sample size
Not documented in this reference
Test temperature
Not documented in this reference
Test method
Not documented in this reference
Test direction
Not documented in this reference
Elongation gauge length
A5, as labelled in supplied table

Temperature & corrosion

Evaluate the medium, concentration, impurities, temperature and loading together. A melting point or oxidation reference is not a safe working-temperature limit.

Service conditions to reviewOxidation resistance does not define the allowable load.800, 800H and 800HT have distinct chemistry and condition requirements.
Temperature-dependent dataNot documented in this reference
  • Strength and elongation vs temperatureShared 800H / 800HT catalogue reference
View material details

Heat treatment

Delivery condition and heat-treatment requirements are agreed for the requested product form and order.

ConditionNot documented in this referenceNot documented in this reference
Reference treatmentNot documented in this referenceNot documented in this reference

Reference applications

Application examples provide context for review; suitability depends on the actual service conditions.

Reference applicationsFurnace fixtures · heat-treatment basketsFurnace components · petrochemical-process equipment

Standards & documentation

Confirm the edition, product form and condition. Material specifications do not establish finished-fastener compliance.

Material specifications by form
Sources
Sources
Sources

Documents for your enquiry

Every BYBOLT delivery includes an MTC / EN 10204 3.1 certificate, heat-number traceability and mechanical testing. Threaded products include sampled GO / NO-GO gauging. Test methods and acceptance criteria follow the agreed specification; PMI, third-party inspection and additional records are agreed separately at quotation.

Take your shortlist to the next step

Share your drawing or product form, dimensions, quantity and operating conditions. Your selected materials will be included as alternatives for review.

Get a Quote
Get a Quote